Elastollan® 1154D53
热塑性聚氨酯弹性体(聚醚)
BASF Corp. Thermoplastic Polyurethanes
Technical Data
产品说明
Elastollan® 1154D53 is a polyether-based thermoplastic polyurethane (TPU). It exhibits excellent abrasion resistance, toughness, transparency, low temperature properties, hydrolytic stability, and fungus resistance. Elastollan® 1154D53 is conforming to the FDA food contact section, book 21, section 177.2600. As with all TPU products, Elastollan® 1154D53 must be dried before processing. The drying step is required to maintain a low moisture content until the product enters the processing equipment. The water content must be less than 0.03% before and during processing. The typical drying conditions should be 2-4 hours @ 195°-220°F (90°-105°C). Elastollan® 1154D53 can be stored for up to 1 year in its original container. Containers should be stored in a cool and dry area.
总体
材料状态 • 已商用:当前有效
资料 1 • Technical Datasheet (English)
搜索 UL 黄卡 • BASF Corp. Thermoplastic Polyurethanes
• Elastollan®
供货地区 • 北美洲
性能特点 • 抗菌性 • 韧性良好
• 耐磨蚀性,良好 • 水解稳定
机构评级 • FDA 21 CFR 177.2600
外观 • 清晰/透明
形式 • 颗粒料
加工方法 • 注射成型
物理性能 额定值单位制 测试方法
比重 1.16g/cm³ ASTM D792
机械性能 额定值单位制 测试方法
抗泰伯磨耗 (1000 g, H-18 转轮) 75.0mg ASTM D1044
弹性体 额定值单位制 测试方法
拉伸应力 ASTM D412
100%应变 20.0MPa
300%应变 30.0MPa
抗张强度 (断裂) 40.0MPa ASTM D412
伸长率 (断裂) 460% ASTM D412
断裂伸长率 70% ASTM D412
撕裂强度 3 180kN/m ASTM D624
硬度 额定值单位制 测试方法
硬度计硬度 (邵氏 D) 53 ASTM D2240
补充信息
Molded plaques 0.080" thick were cured 20 hours @ 100° C before testing.
注射 额定值单位制
干燥温度 90.6 到 104°C
干燥时间 2.0 到 4.0hr
建议的最大水分含量 0.030%
螺筒后部温度 221°C
螺筒中部温度 213°C
螺筒前部温度 204°C
射嘴温度 224°C
加工(熔体)温度 210 到 227°C
备注
1 通过这些链接您能够访问供应商资料。我们尽量保证及时更新资料;不过您可以从供应商处了解最新资料。
2 一般属性:这些不能被视为规格。
3 C 模具
|